The Violet Cake Shop™

Sharing inspirations for my designs and tips I've discovered along the way in my caking journey! <3

Leave a comment

Links to All My Previous Tutorials!

Here are links to all my FREE tutorials that I’ve done so far…and since my blog is new, rather than try and repost them all here I thought it would be better to just link them so you can see all the old ones in one place along with the pics of the cakes that have used the technique!

TWO-TONED PETALS Tutorial – First Ever Tutorial – December 2013:

Two-Tone Petal - twm

Qualin's 6th - Valentino Inspired B&W Ruffle - twm 20131224_121018 - iv - ii Sam & Satoko's at Venue Year of the Horse CNY - cropped - twm


MY STYLIZED RANUNCULUS Tutorial – January 2013:

20131224_121018 - iv - ii  03-01-14 - Finney's 45th Modern with Flowers - wm TVCS - ii - twmpm


IMG_1054 - ii

TWO-TONED BOW Tutorial – This is how I make my two-toned bows that was originally inspired by one made by Sweet Picasso Cake Creations – March 2014:

Eva's 21st Tiffany Blue with Bows - twm  Sam & Satoko's at Venue  Carlington's 2nd Birthday - Minnie, Mickey, Daisy and Donald - Closeup - twmpm

My Two-Toned Bow Tutorial - sneak peek

EASY BLOCK LETTERS and 3D LEGO FIGURE Tutorials – June 2014:

Ethan's 5th Lego Movie - twm  Colin's 9th B-Day Lego Movie Cake - front - twmpm

Easy No Measure Block Letters - 1

SIMPLE ANEMONE with SIMPLE TOOLS Tutorial – August 2014:

Qualin's 3rd - front - wm TVCS - twmpm  The Violet Cake Shop - Simple Anemone Tutorial with Simple Tools - cover photo

I hope you all enjoy using these…Violet =D


Colouring Tip for Wafer Paper – How to Get Even, Rich Tones Without Special Colours or an Edible Printer

Saffron Coloured Wafer Paper Rose

(this was coloured after the flower was made, using thinner brushes for the inside petals)

I did it, yep!  I jumped on the wafer paper bandwagon and I am loving it!  Wafer paper is so versatile and gives a special delicate look to whatever decorative element you’re making.  That’s why it’s so effective for creating flower adornments because it has an airy effect to it which is reminiscent of one of the natural qualities of a flower.  However, with flowers comes the need for a bit of colour!

Now I’ve seen other posts that lament about how hard it is to achieve any type of decent colour on wafer paper, or how it requires special tools and equipment like an edible printer or special candy colours specially made for chocolate or candy melts.  Others have settled for just using a good dose of petal dusts to try and colour wafer which mostly just leaves a VERY patchy appearance, especially when viewed up close.  Often, it requires A LOT of petal dust to achieve any sort of decent depth of colour at all but alas there is still the patchy or spotty appearance, which is ok from far away but up close…fuggedaboudit!  Using tons of petal dust can become quite EXPENSIVE too!  All of this is frustrating to say the least especially considering how beautiful and delicate wafer paper adornments can be.  Straight petal dust on wafer was the first method I tried too, like many others and I was really not satisfied with the results.  Not only was it patchy, but the colours were also muted, not very vibrant at all.

Straight Petal Dust – several coats:

Straight Petal

So I set about trying to find an inexpensive way to colour wafer paper, that did not require any special equipment or colours, that could achieve a look that was not patchy, and would be a lot more VIBRANT…a method using colours that most people would already have.  I knew I could not steam my dusted wafer paper flower because that would just warp the paper or worse, dissolve it to nothingness lol.  So I experimented with any other method I could think of…I’d already tried using a single coat of straight dust, then several (and I mean SEVERAL) coats of straight dust, then dust with alcohol, dust with a touch of water, I even tried dust with shortening…

Then I tried straight gel colour, gel with alcohol, gel with a touch of water…I even tried straight airbrush colours…none achieved the look I wanted.  Problem with gel colours is that they are concentrated.  So if you wanted a nice colour on wafer paper using a gel colour that did not have much water content (to avoid warping the paper), you got overly dark or goopy looking results…not very appealing.  You would need to dilute it to get a nice even shade or tone but the normal ways to dilute most colours just don’t work on wafer paper.  Gel colours with even just a touch of water (although vibrant and even results, colour-wise) still warped the wafer paper enough to change its pure delicate quality.  Other times, depending on the colour, you might get a streaky covering.

I found though that some gel colours worked better than others.  Some, with two coats looked good but you needed to use a heavy hand and LOTS of gel colour in order to MAYBE achieve an even cover on wafer paper.  But that would not be a very cost effective method because it would require A LOT of it to say colour a whole sheet.  Some gel colours depending on the brand and colour, actually contained enough water to still end up warping the paper even if you did not dilute it, so it still was not ideal.  Alcohol mixed with either, although effective when working on fondant because of the speed at which it dries, proved completely disastrous when used on wafer paper!

Here is an example where a straight gel colour had too much water content, that it warped the paper even when undiluted (AmeriColor Sky Blue):

Straight Gel water base twm


Seriously, I tried almost everything my mind could think of…methods that would normally work on fondant or gumpaste…but none of them got the effect I wanted on wafer paper, which was an even, deep or rich colour.  I almost relented and considered buying special candy colours but then that would be ANOTHER set of colours which was getting costly…already had gel colours, petal dusts and airbrush colours…couldn’t really justify getting another set at a good chunk of change JUST to use on wafer paper.

Then I had a eureka moment and thought…hmmm what is it that makes candy colours work with wafer paper?  Well, it was because they were OIL BASED, and oil does not warp wafer paper nor dissolve it in the same way water does.  Why is that?  I don’t know the science behind it but like with regular paper, oil is less destructive than say water.  If you get water on regular print paper, it will warp it straight away and with enough water, it will weaken it to the point it is easy to rip through.  Oil on the other hand is not nearly as destructive.  It does absorb into the paper, but it doesn’t break it down the same way.  Well the same properties seem to apply to wafer paper.  Wafer paper is made up primarily of potato starch and vegetable oil after all.  Water is involved in the process of making wafer paper, but the mixture is dried to the point where there is zero water content in the final product, which is a similar process used in producing print paper.

So I decided to test out my theory that oil (in this case vegetable oil) mixed with petal dust, would create the perfect mixture with which to colour your wafer paper and voila…it worked!  Luckily I tested it some more because it turns out, you need to use just the right amount of oil…too much and the colours can look very spotty and overly concentrated in certain areas, although still more vibrant than straight dusting…too little and it can become too thick and pasty depending on the dust you use, or end up wasting the dust.  The good thing is, you can do more than one coat to increase the vibrancy of the colours if you wanted it deeper.  I also tested gel colours with oil and it worked too but not as well as with dusts.  I found that the mixture never really came together and would be too goopy with some gel colours whereas with others it worked quite well, so it was hit and miss.  Also, some gel colours still had enough water content to warp the wafer paper….again hit and miss.

Here is a quick chart to show the results of some of the testing that was done (petal dust used – Elite Color Hot Pink; gel colour used – Wilton Rose; airbrush colour used – AmeriColor Deep Pink:

Colouring Wafer test

When using dust mixed with oil though, you do get a film on the surface of the wafer paper that, although not visible, does come off on your fingers when handling, and may affect the ability for you to adhere one piece to another.  But if you let it rest overnight, the oil will dissipate enough that you are left with just the slightest amount of oil on the surface.  Then you can still adhere wafer paper coloured this way, with just a bit of water as normal.  I have not tried it with piping gel as the glue, but I would guess that it will also work once it has a chance to rest because the amount of oil on the surface becomes minimal.

When mixing your dust with vegetable oil, you will want to mix it to a paint-like consistency that is not too thick and not too oily appearing.  It’s best to TEST our your dust/oil mixture on SCRAP PIECES of wafer paper to ensure it is the right consistency.  If it is too oily, the colour will appear spotty.  So add a bit more dust until you are happy with the results.  A little goes a long way (unlike with gel colours or straight dusting).  To apply the colour, you can paint with a standard brush.  Or for larger surfaces like a whole sheet, you can use a large wide brush or a blotting method such as wadded up paper towels, a clean kitchen towel or disposable J Cloth.

Side by Side comparison of different mix consistencies (petal dust used – Elite Color Hot Pink):

Mix Consistency

Other things I discovered when testing out this method were that the finer the dust and deeper the colour of the dust, the better the colour result.  Lighter coloured dusts have some white pigmentation included in them so those colours tended to come out more pasty or matte looking.  Also other forms of dust like sparkle dust which is coarser, tends not to colour wafer paper as effectively.  You can get a nice shine but the colour is not very deep, nor even.  Most lustre dusts on the other hand worked pretty well because the dust quality is much finer than say sparkle dust or disco dust.

Example using lighter petal dust with white pigmentation which gives more of a matte finish (Elite Color Aurora Pink):

Light Coloured Dust - ii

Example using lustre dust (Elite Color Blue Bell):

Lustre Dust

Another useful tip is to save your scrap pieces of wafer paper (you know, the pieces that are leftover after you cut out the shapes you are using), to use for testing out the consistency of your mixture.  And it’s always a good idea to test the colour you are mixing to see that you like it before you mix more and attempt to colour whole sheets of wafer paper.  It works even after you’ve assembled your flower.  You just need to use a small brush that fits between the petals you are working on, so the tighter the petals, the thinner or smaller the brush you need to get down deeper.

Side by Side Example of straight dusting (left) and same coloured dust mixed with vegetable oil (right)…(petal dust used – Elite Color Hot Pink)…OH and you’ll notice that the colours from the petal dust/oil mix are even more vibrant in natural light (see picture on the right):

10-04-14 - Side by Side - Lotus - Hot Pink Petal Dust

DISCLAIMER (just in case lol) & VERY IMPORTANT INFO:  I am NOT an expert in wafer paper, nor in all types of dusts or colours.  I have done a lot of reading and played around a lot trying to find a way that works, but do not proclaim to know of all possible types nor methods for colouring wafer paper.  This is just a tip I discovered that worked for me and hopefully works for others.  Through trial and error, I’ve discovered that not all dusts behave the same so best to do a test piece or practice on a smaller surface before deciding to colour entire sheets or a naked flower you’ve worked an hour on.  Some dusts work better than others and what I’ve found is, the finer the dust, the better the results.

I also discovered after more testing that it’s important to make sure there is not too much of the mix ON the brush when you make the first few strokes.  It seems that if there is not already paint on the paper, there is no where else for it to go so if there is too much on the brush, it can concentrate it causing spottiness.  Practice makes perfect and helps with knowing what is just the ‘right’ amount to use so test often until you are comfortable before painting completed pieces.

Happy Caking everyone =D


If you’d like to recreate the stylized wafer paper rose from above, I have a tutorial in my SHOP on Facebook that gives step by steps and tips here: